Sangamo Choice Mechanical Room Thermostat | CHOICE RSTAT1
Sangamo Choice Mechanical Room Thermostat | CHOICE RSTAT1
Sangamo Choice Mechanical Room Thermostat is a basic mechanical room thermostat is an economical and simple to use room thermostat. Simply turn the mechanical control dial on the Sangamo Choice Mechanical Room Thermostat to your desired temperature to control your room temperature. The Choice Mechanical Room Thermostat produces an audible “click” when you turn the dial past the current temperature so you know when the system is being turned ON or OFF.
This mechanical 2 wire Room Thermostat is very easy to install and having volt free contacts is suitable for systems with either a combination or normal boiler. If you have a three wire installation, simply cut back and make safe the neutral and this two wire thermostat will give you years of faithful service.
Features
- Dual diaphragm temperature sensing element
- Suitable for surface or pattress box mounting
- 10 to 30°C Set point range
- 10 Amp current rating
- ErP Class I
- 2 Wire Installation
- Three terminal heating/cooling changeover
Specification
Power Supply: | 230V Ac, 50-60Hz |
Temperature setting Range: | 10°C to 30°C |
Current Rating: | 10(3) Amp |
Terminal Differential: | Approx 4°C |
Operating Temperature Range: | 0°C to 40°C |
Dimensions: | L83 x H83 x D37 |
Complies with: | EN60730-1, En60730-2.9, EMC Directive 2004/108/EC, LVD Directive 2006/95/EC |