Anker SOLIX 800W Alternator Charger for Portable Power Stations 12V 24V | AS2002A1

The Anker SOLIX Alternator Charger (AS2002A1) turns driving time into charging time. Wired to the vehicle battery, it delivers up to 800W into an Anker SOLIX portable power station through the XT60i port, which Anker says is up to eight times faster than a car auxiliary socket and refills a 2kWh unit in about 2.6 hours.

It works with 12V and 24V systems and adjusts its charging profile to the battery type you select in the app, protecting the vehicle's starter battery. Reverse charging lets a power station top up a flat starter battery, and the app lets you start, stop, change modes and set the charge rate. It is not compatible with power stations that run below 34V on the XT60 port, so check your model; the C2000 Gen 2 and F3000 in our power station range are typical partners. See more on the Anker SOLIX brand page.

Key features

• Up to 800W charging from the vehicle alternator
• Recharges a 2kWh power station in about 2.6 hours of driving
• Suits 12V and 24V vehicle systems
• Reverse charging to revive a flat starter battery
• Bluetooth and Wi-Fi app control
• 7m battery cable and 100A fuse supplied

• Output: Up to 800W
• Vehicle system: 12V and 24V
• Power station connection: XT60i, 1m cable
• Battery cable: 7m
• Fuse: 100A
• Connectivity: Bluetooth and Wi-Fi app
• Compatibility: Anker SOLIX portable power stations (not models below 34V on XT60)
• Manufacturer part number: AS2002A1

In the box

• Anker SOLIX Alternator Charger
• XT60i port connection cable (1m)
• Battery connection cable (7m)
• 100A fuse wire
• Installation board and 6 screws
• User manual, safety and warranty card

Suitable for

Campervans, motorhomes, overland vehicles, work vans running tools from a power station, and anyone who wants to arrive with a full battery. Professional installation is recommended.