FuseBox 10A 30mA Type A C Curve 6kA Bi-Directional Mini RCBO | RTAMC10BD

The FuseBox RTAMC10BD is a 10A 30mA Type A C curve RCBO with 6kA breaking capacity, combining overcurrent and residual current protection for one circuit in a single device.

Type A detects AC and pulsating DC residual currents, the minimum type for most modern installations under BS 7671. Its bi-directional design allows supply to either set of terminals, so it can be used where current may flow in either direction, such as circuits fed by solar PV inverters or battery storage. At 10A with a C curve characteristic it is typically used on lighting circuits, outdoor lighting and small fixed appliances. Final device selection should always follow the circuit design, cable size, installation method and fault level of the installation.

Key features

• 10A rated current, C curve characteristic
• 30mA Type A residual current protection
• 6kA breaking capacity
• Protects against overload, short circuit and earth leakage
• Bi-directional, supply from either end
• 1P+N with switched neutral
• Compact single module mini RCBO
• Designed for FuseBox consumer units

• Brand: FuseBox
• Product code: RTAMC10BD
• Product type: Bi-Directional Mini RCBO
• Rated current: 10A
• Tripping characteristic: C Curve
• RCD type: Type A
• Rated residual current: 30mA
• Breaking capacity: 6kA
• Configuration: 1P+N switched
• Bi-directional: Yes
• Mounting: 35mm DIN rail
• Standard: BS EN 61009-1
• Width: 1 module
• Rated voltage: 230V AC
• Dimensions (H x W x D): Approx. 85 x 18 x 69.5mm

Suitable for

Domestic consumer units, rewires and RCBO board upgrades. Typical 10A use: lighting circuits, outdoor lighting and small fixed appliances.