FuseBox 32A 30mA Type A C Curve 6kA Bi-Directional Mini RCBO | RTAMC32BD

Combining an MCB and RCD in one unit, the FuseBox RTAMC32BD protects a 32A circuit against overload, short circuit and earth leakage, with 30mA Type A sensitivity and a 6kA rating.

Type A detects AC and pulsating DC residual currents, the minimum type for most modern installations under BS 7671. Its bi-directional design allows supply to either set of terminals, so it can be used where current may flow in either direction, such as circuits fed by solar PV inverters or battery storage. At 32A with a C curve characteristic it is typically used on ring final circuits, 32A radials, cookers and EV charger supplies. Final device selection should always follow the circuit design, cable size, installation method and fault level of the installation.

Key features

• 32A rated current, C curve characteristic
• 30mA Type A residual current protection
• 6kA breaking capacity
• Protects against overload, short circuit and earth leakage
• Bi-directional, supply from either end
• 1P+N with switched neutral
• Compact single module mini RCBO
• Designed for FuseBox consumer units

• Brand: FuseBox
• Product code: RTAMC32BD
• Product type: Bi-Directional Mini RCBO
• Rated current: 32A
• Tripping characteristic: C Curve
• RCD type: Type A
• Rated residual current: 30mA
• Breaking capacity: 6kA
• Configuration: 1P+N switched
• Bi-directional: Yes
• Mounting: 35mm DIN rail
• Standard: BS EN 61009-1
• Width: 1 module
• Rated voltage: 230V AC
• Dimensions (H x W x D): Approx. 85 x 18 x 69.5mm

Suitable for

Domestic consumer units, rewires and RCBO board upgrades. Typical 32A use: ring final circuits, 32A radials, cookers and EV charger supplies.