FuseBox 40A 2 Pole Normally Open 230V Installation Contactor | INC402
40A 2 pole normally open installation contactor from FuseBox with a 230V coil. DIN rail mounted for switching heating, lighting and pumps from a control signal. Part of the FuseBox circuit protection range, made to work alongside FuseBox boards.
Secure shopping guaranteed
Free Delivery on orders over £100
The FuseBox INC402 is a 40A 2 pole normally open installation contactor with a 230V coil, for remote or automatic switching of loads from a DIN rail.
Normally open contacts close when the coil is energised, used with time switches, thermostats, sensors and building management systems to switch heating, lighting and pumps. Supplied with two 9mm heat dissipation spacers.
Installation notes
Allow the heat dissipation spacing recommended for the contactor when several devices are mounted side by side. Protect the coil supply with a suitable MCB, and size the contactor for the load type, as motor and lamp loads need extra margin.
Key features
- 40A rated contacts
- 2 pole normally open
- 230V coil
- 35mm DIN rail mounting
- 2 x 9mm heat dissipation spacers included
- Brand: FuseBox
- Product code: INC402
- Product type: Installation contactor
- Rated current: 40A
- Poles: 2
- Contacts: Normally Open
- Coil voltage: 230V
- Width: 2 (+1) module
Suitable for
Heating, immersion heaters, lighting control, pumps, EV load management and building services.
| type | Contactor | brand | FuseBox Consumer Units & Circuit Protection |
| brand | FuseBox Consumer Units & Circuit Protection | ||
| colour | White |