Hager Witty One 7kW Single Phase Smart Tethered EV Charging Station Type 2 Socket with CT | XVU107CCT-MO

Compact 7kW Home Tethered EV Charger with Type 2 Socket, RFID & Dynamic Load Management

The Hager Witty One XVU107CCT-MO is a sleek and compact 7kW single-phase Tethered EV charging station designed specifically for residential electric vehicle charging. Combining Hager's distinctive Witty design with smart functionality, robust outdoor protection and straightforward installation, it provides a professional charging solution for modern homes.

Featuring a Type 2S socket, RFID access control, Dynamic Load Management and integrated DC residual current detection, the Witty One is designed to deliver safe and convenient everyday EV charging. This XVU107CCT-MO variant is supplied with a CT, supporting intelligent management of the property's available electrical capacity.

Installers can commission and configure the charger using the dedicated Hager Charge App, while its compact enclosure and flexible top, bottom or rear cable entry help simplify installation even where mounting space is limited.

With an IP55 weather-resistant enclosure, IK10 impact resistance and UV-resistant housing, the Hager Witty One is suitable for both indoor and outdoor installations.

Features

• 7kW Residential EV Charging Station
• Single-Phase 220–240V Supply
• XVU107CCT-MO
• 6.5m Tethered 
• Maximum Rated Current: 32A
• Type 2S Charging Socket
• CT Included
• Dynamic Load Management
• RFID Access Control
• Helps Prevent Unauthorised Charger Use
• Dedicated Hager Charge App
• App-Based Commissioning & Configuration
• Integrated DC Residual Current Detection
• Emergency Release in the Event of Power Failure
• Integrated Cable Holder
• LED Status Indicator
• PV Charging Support with Appropriate Accessories
• IP55 Weather Protection
• IK10 Impact Resistance
• UV-Resistant Housing
• Suitable for Indoor & Outdoor Installation
• Compact Wall-Mounted Design
• Top, Bottom & Rear Power Cable Entry

Smart Home EV Charging

The Witty One is designed around the essential features required for convenient residential EV charging. Its 7kW output and 32A single-phase supply make it an ideal choice for compatible electric vehicles at homes with a suitable electrical installation.

A dedicated Hager Charge App provides an intuitive interface for commissioning and managing the charging station, allowing installers and users to access key charger functionality from a smartphone.

Dynamic Load Management

The XVU107CCT-MO supports Dynamic Load Management, allowing EV charging demand to be managed in relation to the electrical load of the property.

With the supplied CT, the system can help ensure the charger operates within the available electrical capacity, reducing the risk of excessive demand when other high-power appliances are operating.

RFID Access Control

An integrated RFID reader provides convenient user authorisation and helps prevent unauthorised use of the charger.

This is particularly useful for chargers installed on driveways or other accessible areas where additional control over charging access is desirable.

Integrated Electrical Safety

The Witty One incorporates DC residual current detection to enhance charging safety.

It also features an emergency release function in the event of a power failure, providing additional reassurance for everyday residential use.

PV Charging Ready

With the appropriate accessory, the Witty One can support PV charging, enabling compatible installations to make greater use of electricity generated by domestic solar panels.

This makes it a suitable option for homeowners looking to integrate EV charging into a wider home energy system.

Built for Outdoor Installation

The Witty One features a robust enclosure engineered for year-round installation.

Its IP55 ingress protection rating provides resistance against dust and water, while an IK10 impact rating offers a high level of protection against mechanical impact. The UV-resistant housing also helps maintain durability when installed outdoors.

The charger is rated for operating temperatures from -25°C to +50°C.

Installer-Friendly Design

At just 370mm high, 250mm wide and 150mm deep, the Witty One provides a compact footprint suitable for installations where wall space may be limited.

Installation features include:

• Top cable entry
• Bottom cable entry
• Rear cable entry
• Central levelling screw
• Protected electronics
• Wall-mounted installation
• Integrated cable management

These features help provide installers with a straightforward and professional installation process.

• Brand: Hager
• Range: Witty One
• Product Code: XVU107CCT-MO
• Product Type: 6.5m Tethered EV Charging Station
• Application: Residential EV Charging
• Charging Power: 7kW
• Connected Load: 0.1–7kW
• Supply: Single Phase
• Number of Phases: 1
• Nominal Voltage: 220–240V
• Rated Current: 32A
• Frequency: 50–60Hz
• Charging Points: 1
• Connector: Type 2S Socket
• Dynamic Load Management: Yes
• CT: Included
• RFID Reader: Yes
• App Support: Yes
• PV Charging Support: Yes, with Appropriate Accessory
• DC Residual Current Detection: Integrated
• Emergency Release on Power Failure: Yes
• Circuit Breaker: No
• Household Socket: No
• Mounting: Wall Mounted
• Material: Plastic
• IP Rating: IP55
• IK Rating: IK10
• Operating Temperature: -25°C to +50°C
• Height: 370mm
• Width: 250mm
• Depth: 150mm
• Dimensions (H × W × D): 370 × 250 × 150mm

Ideal Applications

The Hager Witty One XVU107CCT-MO is designed primarily for single-home residential Tethered EV charging. Its compact footprint makes it suitable for garages, driveways, carports and exterior walls, while its IP55 and IK10 ratings allow installation in exposed outdoor locations.

Why Choose the Hager Witty One XVU107CCT-MO?

The Hager Witty One XVU107CCT-MO combines a compact, attractive design with the smart functionality required for modern residential EV charging. Its 7kW single-phase output, Type 2 socket, RFID access, supplied CT and Dynamic Load Management provide convenient and controlled charging at home.

With app-based commissioning, integrated DC residual current detection, optional PV integration and robust IP55/IK10 protection, the Witty One provides a dependable EV charging solution from one of the electrical industry's established manufacturers.