Sangamo Choice 2 Channel Heating & Hot Water Programmer PR2N
Sangamo Choice 2 Channel Heating & Hot Water Programmer PR2N
The Sangamo Choice PR2n 2 channel programmer has been designed for separate control of you heating and stored hot water. The Choice PR2n heating and hot water programmes are independent of each other. This gives you the opportunity to save money and control you heating in the most energy saving manner possible. The PR2n programmer can be configured for 24 hour, 5/2 day or 7 day operation, and the flexibility of up to three on/off timings per day.
The Sangamo Choice PR2n 2 channel programmer is Pre-programmed but can easily be changed to suit your particular lifestyle. The unit has a Large and clear to read illuminated display with an attractive modern design that will suit all contemporary homes. The Sangamo Choice PR2n is also suitable for pumped and gravity fed systems.
For fully pumped central heating systems using mid position valves, spring return valves or power open, power closed valves or Gravity hot water pumped heating systems with or without motorised valves fitted into the domestic hot water primary circuit.
Features
- 24 hour, 5/2 day and 7 day selectable.
- 2 or 3 ON/OFF periods selectable
- 1, 2 or 3 hour boost
- Advance to next programmed event
- Automatic Summer/Winter time change
- Standard wall plate - simple plug in and replace
- Pumped or gravity system selectable
Technical Specification
Power Supply: | 230V AC, 50Hz |
Operating Temperature: | 0°C to 40°C |
Switch Rating: | 230V AC, 2(1)Amp (per channel) |
Contact Type: | 1B , Micro-Disconnection |
Battery Type: | Lithium Cell CR2032 |
Enclosure Protection: | IP30 |
Plastics: | Thermoplastic, flame retardant |
Insulation Class: | Double |
Wiring: | For fixed wiring only |
Backplate: | Industry standard |
Dimensions: | 140mm x 87mm x 37mm Clock: 12 hour am/pm, 1 minute resolution, accuracy +/- 1.5 sec/day |
BST/GMT time change: | Automatic |
Program Cycle | 24hr, 5/2day or 7day selectable. |
Program On/offs per day: | 2on/off, 3on/off selectable |
Program resolution: | 10mins Program Selection: Auto, On all day, On constant, off |
Program Override: | 1, 2 or 3 hour, Advance |
Heating System: | Pumped or Gravity |
Complies with: |
EN60730-1, EN60730-2.7, EMC Directive2004/108/EC, LVD Directive 2006/95/EC |
Sangamo Choice PR2n - How to delete program times
How to delete the program times over night on a Sangamo Choice PR2n. For further assistance in using Sangamo products you can call us on 01475 747 511.






