Sangamo Powersaver Dual Flexi 2 Economy 7 Controller PSDF2
The Sangamo Powersaver Dual Flexi 2 Economy 7 Controller bridges the gap between the bulky, aged electro-mechanical immersion controllers and the complicated ‘bells & whistles’ digital versions. The Powersaver Dual Flexi 2 has a table of pre-selectable adjustable programs are offered which cover all of the low rate electricity tariffs, including Economy 7, Economy 10 & Eco 20:20 times.
The Dual Flexi 2 has an Installer Switch to the program of choice (refer to Installation and User Instructions). Adjustment is possible to the preset times enabling the program periods to be reduced or cancelled as required. The review button allows ON/OFF times to be checked & there is automatic GMT/BST changeover.
There is a ½ hour, 1 hour & 2 hour boost function with a digital display countdown clock, allowing the user to clearly see boost times. There is also a programmable boost function for further end user convenience; this program is deliberately limited to a maximum of 2 hours, meaning expensive electricity is not being wasted during peak times.
The Sangamo Powersaver Dual Flexi 2 Economy 7 Controller is suitable for Single, Twin & Dual element immersion heaters.
- Suitable for single, dual and twin immersion elements
- Pre-set programs for use with low rate tariffs (Economy 7, Economy 10 & Eco 20:20)
- Direct upgrade to Horstmann E7 & E7Q and Sangamo Q7 controllers
- 24 hour electronic timer
||230V +10% / -15%
||13A Resistive 230V Suitable for immersion heaters up to 3kW
||Micro-disconection on control. Disconnection to immersion heater(s) via double pole rocker switch
||+/- 0.5 sec per day at +23°C
||0°C to 35°C
||169mm wide, 114mm hight, 60mm deep (excluding rocker switch & buttons)