ALL LED Spartan Pro 4W/6W CCT & Wattage Selectable Fire Rated Dimmable Downlight | AFD600D/PRO

Professional IP44 Fire Rated LED Downlight with RotaLens™ CCT Selection, 4W/6W Output & 55–75mm Cut-Out

At the heart of Spartan Pro is ALL LED's innovative patented RotaLens™ Technology. Instead of removing the downlight from the ceiling to access a conventional CCT selector, installers can simply twist the lens to change the colour temperature between 3000K Warm White, 4000K Cool White and 6500K Daylight.

The downlight is also wattage selectable between 4W and 6W, allowing the light output and energy consumption to be tailored to the installation. At 6W and 4000K, output reaches up to 755 lumens, delivering an impressive efficacy of approximately 126 lumens per watt.

Designed and engineered in the UK, Spartan Pro combines a 55–75mm cut-out range, shallow 40mm minimum ceiling void, quick-connect loop-in/loop-out wiring, IP44 protection, trailing-edge dimming and extensive fire-rating performance in one versatile fitting.

Features

• ALL LED Spartan Pro Professional Downlight
• Product Code AFD600D/PRO
• 4W / 6W Wattage Selectable
• 3000K / 4000K / 6500K CCT Selectable
• Patented RotaLens™ Technology
• Change CCT by Twisting the Lens
• No Need to Remove Downlight to Change CCT
• Up to 755 Lumens
• Up to 126lm/W Efficiency
• 36° Beam Angle
• Dimmable
• Trailing-Edge Dimming
• IP44 Rated
• Fire Rated
• 30, 60 & 90 Minute Timber Joist Testing
• 30 & 90 Minute I-Joist Testing
• 30 Minute Metal Web Joist Testing
• 55–75mm Ceiling Cut-Out
• Minimum 40mm Ceiling Void
• Insulation Coverable
• 2-Part Push-Fit Connector
• Loop-In / Loop-Out Terminals
• 0.8mm Ultra-Slim Polar White Bezel Included
• Optional Snap-On Bezels Available
• CRI 80
• Power Factor >0.9
• Class II
• 220–240V AC
• 50/60Hz
• ≥30,000 Hour L70 B50 Lifetime
• ≥100,000 Switching Cycles
• Designed & Engineered in the UK
• 3-Year Guarantee

Patented RotaLens™ Technology

One of the standout features of the Spartan Pro AFD600D/PRO is ALL LED's patented RotaLens™ Technology.

Traditional CCT-selectable downlights often position the colour-temperature switch behind the fitting, meaning the downlight has to be pulled out of the ceiling whenever the selected colour needs to be changed.

Spartan Pro takes a different approach.

Simply twist the lens to select the required CCT without removing the fitting from the ceiling.

This can make commissioning considerably easier, particularly on projects where the preferred colour temperature is being determined after installation.

There are no tools required and no need to disturb the ceiling finish simply to change between the available colour temperatures.

Three Selectable Colour Temperatures

The Spartan Pro provides three CCT options from one fitting:

• 3000K Warm White – a softer, warmer appearance suited to comfortable residential environments
• 4000K Cool White – a crisp neutral-white appearance suitable for kitchens, workspaces and general-purpose lighting
• 6500K Daylight – a much cooler daylight appearance for applications requiring a bright, crisp visual effect

Having all three options within one downlight simplifies stockholding while giving installers greater flexibility on site.

If the customer's preference changes during commissioning, the RotaLens™ system makes the CCT straightforward to adjust.

Selectable 4W or 6W Output

Colour temperature is not the only adjustable characteristic.

The AFD600D/PRO is wattage selectable between 4W and 6W, allowing the installer to tailor the output to the room and required lighting level.

The 4W setting is useful where lower output or reduced energy consumption is desirable, while the 6W setting provides increased illumination for areas requiring a higher light level.

This versatility allows one product to cover a wider variety of lighting requirements.

Up to 755 Lumens

Light output varies according to both the selected wattage and colour temperature.

At 4W, the stated luminous flux is:

• 3000K: up to 470lm
• 4000K: up to 510lm
• 6500K: up to 490lm

At 6W, the stated luminous flux increases to:

• 3000K: up to 660lm
• 4000K: up to 755lm
• 6500K: up to 700lm

The highest output is therefore achieved at 6W / 4000K, delivering up to 755 lumens.

Up to 126 Lumens per Watt

With up to 755 lumens available from a 6W input, Spartan Pro achieves approximately 126 lumens per watt at its highest-efficiency setting.

This combination of strong light output and low operating power makes the fitting an attractive option for modern energy-conscious lighting schemes.

The selectable wattage also means installers can reduce the power consumption where the full 6W output is unnecessary.

55–75mm Cut-Out Range

The 55–75mm cut-out compatibility gives the Spartan Pro additional installation flexibility.

This broad cut-out range can be particularly useful on refurbishment and replacement projects where existing ceiling openings may differ in size.

Rather than requiring every existing opening to match one precise cut-out dimension, the Spartan Pro can accommodate a useful range of ceiling apertures.

This makes the AFD600D/PRO suitable for both new installations and downlight replacement projects.

Only 40mm Minimum Ceiling Void Required

Spartan Pro is designed to fit within a minimum ceiling void of just 40mm, excluding insulation.

Its shallow installation requirement can make a significant difference in modern construction where available ceiling depth may be restricted by joists, services or other building components.

This is particularly useful for refurbishment projects and installations where deeper conventional downlights may be difficult to accommodate.

Quick 2-Part Push-Fit Connector

Installation speed is enhanced by a 2-part push-fit connector with loop-in and loop-out terminals.

This allows the electrical connections to be made quickly and neatly, helping reduce installation time when multiple fittings are being installed.

The detachable two-part arrangement also makes the fitting easier to connect and handle during installation.

Loop-In / Loop-Out Wiring

Integrated loop-in and loop-out terminals make the Spartan Pro particularly convenient for installations containing multiple downlights.

Rather than relying on additional junction arrangements simply to continue the circuit between fittings, the dedicated terminals provide a cleaner method of wiring compatible installations.

This can help create a more organised installation and reduce time spent terminating each fitting.

Comprehensive Fire Rating

The Spartan Pro has been tested across several common ceiling and joist constructions.

Its stated fire-rating performance includes:

• Timber Joists: 30, 60 and 90 minutes
• I-Joists: 30 and 90 minutes
• Metal Web Joists: 30 minutes

This broad testing makes the fitting particularly useful across modern residential construction, where engineered I-joists and metal web joists are increasingly common alongside traditional timber structures.

The required installation method and tested ceiling construction should always be observed to retain the relevant fire performance.

Building Regulations Ready

Spartan Pro is designed to support compliance with key areas of the Building Regulations, including:

• Part B – Fire Safety
• Part C – Moisture
• Part E – Resistance to the Passage of Sound
• Part L – Conservation of Fuel and Power / Air Leakage Requirements

This helps make the downlight a practical choice for professional new-build and refurbishment projects where multiple regulatory requirements must be considered.

IP44 Rated

The AFD600D/PRO carries an IP44 ingress-protection rating, providing protection appropriate to a variety of indoor lighting applications where splashes may occur.

This makes it particularly useful for kitchens and appropriate bathroom locations, subject to the applicable electrical installation requirements and bathroom zoning rules.

The IP44 rating should not be interpreted as making the fitting suitable for every bathroom zone or exposed outdoor location.

Dimmable as Standard

The Spartan Pro is dimmable, allowing compatible lighting controls to adjust the light level according to the room and application.

The specified dimming method is trailing edge.

A compatible LED dimmer should be used, with the total connected load and minimum/maximum dimmer loading considered when designing the installation.

36° Beam Angle

A 36° beam angle provides a controlled distribution of light suitable for general downlighting and accent-style applications.

This beam provides a useful balance between concentrated illumination and broader room coverage, making the fitting suitable for kitchens, living areas, hallways and many commercial interiors.

Ultra-Slim 0.8mm Polar White Bezel

Each fitting includes an exceptionally slim 0.8mm Polar White bezel.

The low-profile bezel creates a clean, contemporary ceiling appearance without a heavy or bulky visible trim.

The Polar White finish also coordinates easily with conventional white ceilings.

Optional Snap-On Bezels

Where a different finish is required, slim snap-on bezels are available separately.

This allows the appearance of the fitting to be adapted to suit the room's interior scheme without changing the complete downlight.

It also provides additional flexibility for developers, designers and installers using the same core fitting across properties with different decorative finishes.

Insulation Coverable

The Spartan Pro is specified as insulation coverable, providing additional flexibility when installed in insulated ceiling constructions.

The manufacturer's installation requirements should always be followed, particularly with regard to insulation, minimum void requirements and any associated thermal considerations.

Long-Life LED Performance

The integrated LED light source is rated to a L70 B50 lifetime of at least 30,000 hours.

It is also specified for at least 100,000 switching cycles, supporting use in frequently switched residential and commercial environments.

• Brand: ALL LED
• Range: Spartan Pro
• Product Code: AFD600D/PRO
• Product Type: Fire Rated LED Downlight
• Wattage: Selectable 4W / 6W
• CCT: Selectable 3000K / 4000K / 6500K
• CCT Selection Technology: Patented RotaLens™
• 3000K Description: Warm White
• 4000K Description: Cool White
• 6500K Description: Daylight
• Maximum Luminous Flux: Up to 755lm
• 4W / 3000K Output: Up to 470lm
• 4W / 4000K Output: Up to 510lm
• 4W / 6500K Output: Up to 490lm
• 6W / 3000K Output: Up to 660lm
• 6W / 4000K Output: Up to 755lm
• 6W / 6500K Output: Up to 700lm
• Maximum Efficiency: Up to 126lm/W
• Useful Flux 4W / 3000K: Up to 360lm
• Useful Flux 4W / 4000K: Up to 400lm
• Useful Flux 4W / 6500K: Up to 380lm
• Useful Flux 6W / 3000K: Up to 515lm
• Useful Flux 6W / 4000K: Up to 590lm
• Useful Flux 6W / 6500K: Up to 550lm
• Beam Angle: 36°
• CRI: 80
• SDCM: <6
• Dimmable: Yes
• Dimming Method: Trailing Edge
• Operating Voltage: 220–240V AC
• Input Frequency: 50/60Hz
• Maximum Operating Current at 4W: 0.025A
• Maximum Operating Current at 6W: 0.032A
• Power Factor: >0.9
• Displacement Factor: 0.9
• Electrical Class: Class II
• Ingress Protection: IP44
• Cut-Out: 55–75mm
• Minimum Ceiling Void: 40mm excluding insulation
• Body Material: Polycarbonate & Pressed Steel
• Bezel Colour: Polar White
• Standard Bezel Thickness: 0.8mm
• Connector: 2-Part Push-Fit
• Loop-In / Loop-Out: Yes
• Insulation Coverable: Yes
• Timber Joist Fire Rating: 30 / 60 / 90 Minutes
• I-Joist Fire Rating: 30 / 90 Minutes
• Metal Web Joist Fire Rating: 30 Minutes
• Part B Compliance: Yes – Fire
• Part C Compliance: Yes – Moisture
• Part E Compliance: Yes – Acoustic
• Part L Compliance: Yes – Air Leakage
• Ambient Operating Temperature: -10°C to +25°C
• Switching Cycles: ≥100,000
• Rated Lifetime: ≥30,000 Hours L70 B50
• Survival Factor: >0.9
• Lumen Maintenance Factor: >0.96
• Flicker Metric PstLM: <1
• Designed & Engineered: UK
• Guarantee: 3 Years

Important Product Code Note

The supplied product reference is AFD600D/PRO, while the technical data also references AFD600D/CCT.

For this listing, AFD600D/PRO should be retained as the primary sellable product code, while the performance figures above are based on the technical data supplied for the corresponding 4W/6W Spartan Pro CCT-selectable fitting.

Suitable Applications

• Domestic Downlighting
• New-Build Homes
• Residential Developments
• Property Refurbishments
• Downlight Replacement Projects
• Kitchens
• Appropriate Bathroom Locations
• Living Rooms
• Dining Rooms
• Bedrooms
• Hallways
• Landings
• Home Offices
• Apartments
• Hotels
• Offices
• Retail Interiors
• Commercial Properties
• Timber Joist Ceilings
• I-Joist Ceilings
• Metal Web Joist Ceilings
• Shallow Ceiling Voids
• Insulated Ceilings
• Dimmable Lighting Installations
• CCT Selectable Lighting Projects

Why Choose the ALL LED Spartan Pro AFD600D/PRO?

The ALL LED Spartan Pro AFD600D/PRO combines several installer-focused features into one highly flexible professional downlight.

Its patented RotaLens™ Technology is a major advantage, allowing the installer or customer to change between 3000K, 4000K and 6500K simply by twisting the lens, without pulling the fitting back through the ceiling.

The selectable 4W or 6W output provides further flexibility, while light output of up to 755 lumens and approximately 126lm/W delivers strong performance from a low-energy LED fitting.

Installation is simplified by the 55–75mm cut-out range, 40mm minimum ceiling void and two-part push-fit loop-in/loop-out connector, making the fitting equally attractive for new-build and refurbishment work.

Add IP44 protection, trailing-edge dimming, insulation-coverable construction, a 30,000-hour rated lifetime and ultra-slim 0.8mm Polar White bezel, and the result is a highly adaptable downlight designed around the needs of professional installers.

For customers looking for a 4W/6W selectable, three-CCT, dimmable and fire rated LED downlight with a 55–75mm cut-out, the ALL LED Spartan Pro AFD600D/PRO provides an exceptionally flexible solution.