Ansell 60W 24V Constant Voltage LED Driver | AD60/24V

IP20 Class II Non-Dimmable 24V LED Driver for LED Strip Lighting

The Ansell AD60/24V 60W 24V LED Driver is a compact constant-voltage, non-dimmable power supply designed for compatible 24V LED lighting applications.

Providing up to 60W of power at 24V, the driver is particularly well suited to compatible 24V LED strip lighting systems used across residential, hospitality, retail and commercial interiors.

The AD60/24V accepts a standard 220–240V AC mains input and converts it to the low-voltage supply required by compatible 24V LED products.

Its IP20 rating identifies this particular model as an indoor driver, while Class II construction provides double-insulated electrical protection.

With compact dimensions of approximately 185 × 64 × 22mm, the driver can be incorporated into suitable accessible indoor installation locations where reliable fixed-output power is required.

For straightforward 24V LED installations where dimming is not required, the Ansell AD60/24V provides a simple and dependable constant-voltage driver solution.

Key Features

• Ansell 24V LED Driver
• Product Code AD60/24V
• 60W Maximum Power
• 24V Constant Voltage Output
• 220–240V AC Input
• Non-Dimmable
• IP20 Rated
• Class II Construction
• Double Insulated
• Designed for Indoor Use
• Suitable for Compatible 24V LED Strip
• Compact Driver Design
• 185mm Length
• 64mm Width
• 22mm Depth
• Approximately 0.223kg
• Suitable for Residential Lighting
• Suitable for Retail Lighting
• Suitable for Hospitality Lighting
• Suitable for Commercial LED Installations

60W 24V Constant Voltage LED Driver

The AD60/24V is a constant-voltage LED driver, designed to provide a stable 24V supply to compatible LED lighting.

Constant-voltage drivers are commonly used with LED strip and other LED products specifically designed to operate from a fixed 24V DC supply.

This makes the AD60/24V particularly useful when creating LED strip installations where a suitable mains-to-24V power supply is required.

Up to 60W Output

With a rated capacity of 60W, the AD60/24V can power compatible 24V LED loads provided the connected installation remains within the driver's permitted output capacity.

When designing an LED strip installation, the total connected wattage should be calculated according to the wattage per metre and total strip length.

The driver should then be selected with suitable capacity for the intended connected load and installation conditions.

Designed for 24V LED Applications

The AD60/24V is specifically intended for 24V LED applications.

The voltage requirement of the connected LED product should always be checked before installation.

A 24V driver should only be connected to LED products designed for a compatible 24V constant-voltage supply.

Ideal for LED Strip Lighting

LED strip is one of the primary applications for the AD60/24V.

Ansell lists the driver as an accessory across its compatible 24V LED strip ranges, making it suitable for creating fixed-output strip-lighting installations in appropriate indoor locations.

Potential uses include:

• Cabinet Lighting
• Shelf Lighting
• Display Lighting
• Feature Lighting
• Cove Lighting
• Retail Displays
• Hospitality Lighting
• Residential Accent Lighting
• Commercial Interior Lighting

The compact dimensions make the driver relatively easy to accommodate within an appropriate accessible installation location.

220–240V Mains Input

The AD60/24V accepts a 220–240V AC input, allowing it to be incorporated into compatible UK mains-powered lighting installations.

The driver converts the mains supply to the low-voltage output required by compatible 24V LED lighting.

Installation and connection should be carried out in accordance with the manufacturer's instructions and applicable electrical installation requirements.

Non-Dimmable Operation

The Ansell AD60/24V is a non-dimmable LED driver.

It is intended for applications where straightforward on/off operation at the connected LED load's normal output is required.

This makes it a practical option for fixed-output LED strip installations where adjustable brightness is unnecessary.

Where dimming is required, an appropriate dimmable driver and compatible control arrangement should be selected instead.

IP20 Rated

The AD60/24V carries an IP20 ingress protection rating.

This means it is intended for suitable dry indoor locations rather than exposed outdoor or wet environments.

The driver should therefore be installed within an appropriate internal location that provides the environmental protection required by the installation.

Ansell also produces higher-IP driver variants for applications requiring increased environmental protection, but the AD60/24V itself is the IP20 indoor version.

Indoor Installation

Ansell specifically identifies the AD60/24V for internal use.

This makes it suitable for appropriate installations within homes, shops, hospitality premises and commercial interiors.

Its compact design can help when incorporating the driver into suitable accessible locations associated with concealed or architectural LED strip installations.

The installation location must still provide suitable ventilation, accessibility and environmental protection in accordance with the manufacturer's requirements.

Class II Construction

The AD60/24V is specified as Class II.

Class II electrical equipment uses double or reinforced insulation as its method of protection and does not rely on a protective earth connection in the same way as Class I equipment.

This makes the driver well suited to compact LED lighting installations where a Class II power supply is specified.

Compact 185 × 64 × 22mm Design

The driver measures approximately:

• 185mm Long
• 64mm Wide
• 22mm Deep

Its slim 22mm profile can be particularly useful when designing LED strip installations where available installation space is limited.

The final position should always remain appropriate for the driver's operating requirements and any necessary future access.

Lightweight Construction

At approximately 0.223kg, the AD60/24V is a lightweight LED power supply.

The compact and lightweight design makes it convenient for integration into suitable interior lighting installations without adding unnecessary bulk.

Suitable for Residential LED Lighting

The AD60/24V can be used as part of compatible residential LED strip installations.

Potential applications include accent lighting, shelving, cabinets, furniture details and architectural lighting features.

Its non-dimmable configuration makes it particularly suitable where simple switched operation is required.

Suitable for Retail Lighting

LED strip is widely used in retail environments for display, shelf and feature illumination.

The AD60/24V provides a compatible 24V constant-voltage power source for appropriate LED loads within its rated capacity.

Its compact form factor can help installers accommodate the driver within suitable shop-fitting and display arrangements.

Suitable for Hospitality Lighting

Compatible 24V LED strip can also be used extensively in hospitality interiors.

Bars, restaurants, hotels and similar environments can use LED strip for decorative features, shelving, counters, architectural details and indirect illumination.

Where fixed-output operation is required, the AD60/24V provides a straightforward non-dimmable 24V driver solution.

Suitable for Commercial Applications

The Ansell AD60/24V is equally useful for appropriate commercial interior lighting projects.

Its combination of 60W capacity, 24V constant-voltage output, compact dimensions and Class II construction makes it a practical power supply for a variety of compatible LED installations.

Choosing the Correct LED Driver

Correct driver selection is essential when designing an LED lighting system.

Before using the AD60/24V, installers should confirm that:

• The LED product requires a 24V constant-voltage supply
• The total connected load is suitable for the driver's rated capacity
• Non-dimmable operation is appropriate
• The installation location is suitable for an IP20 indoor driver
• The connected LED product and driver are electrically compatible
• Installation complies with the manufacturer's instructions and relevant electrical requirements

This helps ensure reliable operation and avoids incorrectly matching the driver to the LED load.

• Brand: Ansell Lighting
• Product Code: AD60/24V
• Product Type: Constant Voltage LED Driver
• Rated Power: 60W
• Output Voltage: 24V
• Driver Type: Constant Voltage
• Input Voltage: 220–240V AC
• Dimmable: No
• IP Rating: IP20
• Electrical Class: Class II
• Internal / External: Internal
• Length: 185mm
• Width: 64mm
• Depth: 22mm
• Product Weight: 0.223kg
• CE Marked: Yes
• Application: Compatible 24V LED Lighting
• Primary Use: Compatible 24V LED Strip Lighting
• EAN / GTIN: 5056144280759

Suitable Applications

• 24V LED Strip Lighting
• Residential LED Lighting
• Commercial LED Lighting
• Retail Lighting
• Hospitality Lighting
• Display Lighting
• Shelf Lighting
• Cabinet Lighting
• Cove Lighting
• Feature Lighting
• Accent Lighting
• Architectural Lighting
• Shop-Fitting Projects
• Interior Lighting Projects
• Fixed-Output LED Installations
• Non-Dimmable LED Lighting
• Compatible Ansell 24V LED Strip

Why Choose the Ansell AD60/24V?

The Ansell AD60/24V 60W 24V LED Driver provides a straightforward solution for powering compatible low-voltage LED lighting.

Its 60W capacity and 24V constant-voltage output make it particularly suitable for compatible LED strip installations where reliable fixed-output operation is required.

A standard 220–240V mains input allows the driver to convert the incoming supply to the 24V output required by compatible LED products.

Its IP20 rating makes it suitable for protected indoor environments, while Class II construction provides double-insulated electrical protection.

Compact 185 × 64 × 22mm dimensions make the driver relatively easy to integrate into suitable accessible locations, particularly where space is limited.

For residential, retail, hospitality and commercial projects requiring a 60W non-dimmable 24V constant-voltage LED driver, the Ansell AD60/24V provides a compact and practical solution from an established professional lighting manufacturer.