Aurora Esa Spot Fixed 6W Colour Selectable Downlight with PIR Black | 100620

IP65 Triac Dimmable 6W LED Downlight with PIR, Photocell & 2700K/3000K/4000K CCT Selection

The Aurora Esa Spot Fixed 6W Colour Selectable Downlight with PIR Black | 100620 combines efficient LED illumination, automatic motion detection and selectable colour temperature in a compact fixed recessed downlight.

Producing between 510 and 560 lumens from just 6W, the Esa Spot achieves an efficacy of up to 93lm/W while providing a practical 50° beam angle for focused general illumination.

An integrated PIR motion sensor automatically switches the light on when movement is detected, while the built-in photocell provides additional control according to ambient light levels. This makes the downlight particularly useful for areas where lighting is required automatically as people enter and leave.

The fitting is also colour selectable between 2700K, 3000K and 4000K, allowing the same downlight to provide warm white, standard warm white or neutral white illumination according to the application.

Finished in black and featuring Triac dimming, IP65 protection and an IK07 impact rating, the Aurora 100620 provides a versatile solution for residential and commercial applications including bathrooms, corridors, storage cupboards and other circulation or intermittently occupied spaces.

Key Features

• Aurora Esa Spot LED Downlight
• Product Code 100620
• Fixed Recessed Downlight
• Integrated PIR Motion Sensor
• Integrated Photocell
• 6W LED Power
• 510–560 Lumen Output
• High Efficacy up to 93lm/W
• Colour Selectable
• 2700K Warm White
• 3000K Warm White
• 4000K Neutral White
• Triac Dimmable
• 50° Beam Angle
• IP65 Rated
• IK07 Impact Rating
• Black Finish
• Adjustable PIR Controls
• Automatic Motion-Activated Lighting
• Adjustable Timer
• Adjustable Sensitivity
• Adjustable Lux Control
• Aluminium & Polycarbonate Construction
• Clear Polycarbonate Diffuser
• 68mm Ceiling Cut-Out
• Compact 88mm × 43mm Size
• L80B10 50,000-Hour Lifespan
• -20°C to +40°C Operating Temperature
• 5-Year Warranty
• Suitable for Residential & Commercial Applications

Integrated PIR Motion Sensor

One of the key features of the Aurora Esa Spot 100620 is its integrated PIR motion sensor.

The PIR detects movement and automatically activates the downlight, making it particularly useful in locations where manual switching may be inconvenient or where lights are frequently left switched on unnecessarily.

This can provide both additional convenience and potential energy savings in areas with intermittent occupancy.

Typical applications include corridors, bathrooms, storage spaces and other areas where lighting is generally only required while somebody is present.

Adjustable PIR Control

The Esa Spot provides adjustable PIR functionality, enabling operation to be tailored more closely to the installation.

Rather than relying on a completely fixed motion sensor configuration, the fitting provides control over key PIR parameters including:

• Timer
• Sensitivity
• Lux / Photocell Level

This gives the installer greater flexibility when configuring the downlight for different rooms and occupancy patterns.

Integrated Photocell

The PIR system incorporates a photocell for ambient light detection.

The lux setting can be used to prevent unnecessary activation when sufficient natural or background light is already available.

For example, in a location receiving useful daylight, the photocell can help prevent the downlight from operating simply because movement has been detected when additional artificial illumination is unnecessary.

This combination of motion detection and ambient-light sensing helps provide more intelligent automatic lighting control.

Adjustable Timer

The integrated timer determines how long the downlight remains illuminated after motion is detected.

This allows the automatic lighting period to be configured according to the application rather than relying on a single fixed delay.

Shorter periods can be useful for transient circulation spaces, while longer periods may be preferable in locations where occupants are likely to remain for more time.

Adjustable PIR Sensitivity

PIR sensitivity can also be adjusted, allowing the sensor response to be better matched to the space.

This is particularly useful because motion detection requirements can vary considerably between a compact cupboard, bathroom or larger circulation area.

The adjustable sensor provides greater flexibility when commissioning the lighting installation.

Three Selectable Colour Temperatures

The Aurora Esa Spot provides a choice of three colour temperatures from a single fitting:

• 2700K – Warm White
• 3000K – Warm White
• 4000K – Neutral White

This CCT-selectable design provides greater installation flexibility and reduces the need to stock separate downlights for different colour temperatures.

The preferred colour temperature can be selected to suit the surrounding décor and intended atmosphere of the room.

2700K Warm White

The 2700K setting produces a warmer, softer appearance.

It is particularly suitable for residential environments where a relaxed and comfortable lighting effect is preferred.

This setting can work especially well alongside traditional warm decorative lighting.

3000K Warm White

Selecting 3000K provides a slightly cleaner warm white appearance while retaining a comfortable residential character.

It is a popular choice for general interior lighting where a balance between warmth and visual clarity is required.

4000K Neutral White

The 4000K setting provides a cleaner neutral white light.

This can be particularly effective in bathrooms, corridors, storage areas and commercial spaces where greater visual clarity and a more functional lighting appearance are desired.

Having all three options within the same fitting provides excellent flexibility during installation.

510–560 Lumen Output

Despite consuming only 6W, the Esa Spot produces between 510 and 560 lumens, depending on the selected operating configuration.

This provides useful general illumination from a compact recessed fitting while maintaining low power consumption.

With an efficacy of up to 93 lumens per watt, the 100620 provides efficient LED performance for both residential and commercial installations.

50° Beam Angle

The downlight provides a 50° beam angle, delivering controlled illumination into the space below.

This provides a useful balance between concentrated spotlighting and wider general illumination.

Multiple fittings can therefore be arranged across a ceiling to provide effective and consistent illumination while retaining the compact visual appearance of recessed spotlights.

Triac Dimmable

The Aurora 100620 is specified as Triac dimmable.

When used with a suitable compatible dimming system, this provides additional control over the lighting level and atmosphere of the space.

Dimming can be particularly useful in residential applications where full output may be desirable for practical tasks but lower illumination is preferred at other times.

Compatibility between the LED fitting, dimmer and installation should always be checked when designing a dimmable lighting circuit.

IP65 Protection

The Esa Spot is IP65 rated, providing protection against dust ingress and water jets when correctly installed.

This enhanced ingress protection makes the fitting suitable for a broader range of applications than a standard open indoor downlight.

It is particularly useful where increased moisture protection is desirable, including appropriate bathroom installations.

Installation in bathrooms and other regulated locations must always comply with the applicable electrical installation requirements and zoning rules.

IK07 Impact Rating

In addition to its IP65 ingress protection, the Esa Spot carries an IK07 impact rating.

This provides additional mechanical durability and makes the fitting suitable for locations where a more robust recessed downlight is desirable.

Aluminium & Polycarbonate Construction

The Esa Spot uses a combination of aluminium and polycarbonate construction.

This provides a lightweight but durable luminaire body suitable for recessed ceiling installation.

A clear polycarbonate diffuser is incorporated into the fitting to provide protection to the LED light source while allowing effective light transmission.

Compact Recessed Installation

The Aurora 100620 has been designed for compact recessed installation.

A 68mm ceiling cut-out is required, while the fitting itself measures approximately 88mm × 43mm.

This compact profile allows the downlight to integrate discreetly into the ceiling while incorporating the LED light source, PIR functionality and colour-selection technology within one fitting.

Black Finish

The black finish gives the Esa Spot a contemporary appearance that works particularly well with modern interior designs.

It can complement black switches, sockets, track lighting, architectural details and other dark interior finishes.

The black bezel also provides a stronger visual contrast against lighter ceilings where the downlight is intended to become part of the overall interior design rather than disappear into the ceiling.

Long 50,000-Hour Rated Lifespan

Aurora specifies an L80B10 rated lifespan of 50,000 hours.

The L80B10 designation provides a more informative indication of expected LED performance than a simple headline operating-hours figure.

This long rated life makes the Esa Spot suitable for applications where reducing maintenance and replacement requirements is important.

Wide Operating Temperature Range

The fitting is designed to operate across an ambient temperature range of -20°C to +40°C.

This provides flexibility across a broad variety of appropriate indoor environments.

Ideal for Corridors & Circulation Areas

Corridors and circulation areas are particularly well suited to PIR-controlled lighting.

These spaces are often only occupied briefly, meaning conventional lighting can easily remain switched on long after the occupant has left.

The integrated motion sensor allows the Esa Spot to provide illumination automatically when movement is detected and switch according to its configured timer afterwards.

Ideal for Storage Areas & Cupboards

Storage cupboards and similar intermittently occupied spaces are another excellent application for automatic PIR lighting.

The light can activate when somebody enters or opens and accesses the space, reducing dependence on manually operated switches.

The adjustable timer, sensitivity and photocell provide additional flexibility when configuring operation for the location.

Suitable for Bathroom Applications

Aurora specifically identifies the Esa Spot as suitable for applications including bathrooms.

Its IP65 rating provides enhanced ingress protection, while PIR operation can provide convenient automatic illumination.

As with any electrical product used in a bathroom, the exact installation position and electrical arrangement must comply with current wiring regulations and applicable bathroom zoning requirements.

Energy-Saving Lighting Control

The Esa Spot combines several features that can contribute to more efficient lighting operation.

Its 6W LED light source provides up to 560 lumens, while PIR motion detection means illumination can be limited to periods when movement is detected.

The integrated photocell adds another layer of control by helping prevent unnecessary operation when sufficient ambient light is available.

Together, these features make the 100620 particularly suitable for areas where lighting is frequently required for relatively short periods.

• Brand: Aurora
• Range: Esa Spot
• Product Code / SKU: 100620
• Product Type: Fixed LED Downlight with PIR
• Wattage: 6W
• Light Output: 510–560 Lumens
• Efficacy: Up to 93lm/W
• Colour Temperature: 2700K / 3000K / 4000K
• Colour Selectable: Yes
• Beam Angle: 50°
• Dimming Type: Triac Dimmable
• PIR Sensor: Yes
• Photocell: Yes
• Adjustable Timer: Yes
• Adjustable Sensitivity: Yes
• Adjustable Lux Control: Yes
• Supply Voltage: 220–240V AC
• IP Rating: IP65
• Impact Rating: IK07
• Body Material: Aluminium & Polycarbonate
• Diffuser Material: Clear Polycarbonate
• Finish: Black
• Cut-Out: 68mm
• Dimensions: 88 × 43mm
• Rated Lifespan: L80B10 50,000 Hours
• Operating Temperature: -20°C to +40°C
• Warranty: 5 Years

Suitable Applications

• Bathrooms
• Corridors
• Hallways
• Storage Cupboards
• Utility Areas
• Entrance Areas
• Circulation Spaces
• Residential Properties
• Apartments
• Commercial Properties
• Offices
• Staff Areas
• Storage Rooms
• Changing Areas
• Intermittently Occupied Spaces
• PIR-Controlled Lighting Installations
• Energy-Efficient Lighting Projects
• Residential Recessed Lighting
• Commercial Recessed Lighting

Why Choose the Aurora Esa Spot 100620?

The Aurora Esa Spot Fixed 6W Colour Selectable Downlight with PIR Black | 100620 combines several useful lighting and control functions within one compact recessed fitting.

Its integrated PIR motion sensor provides automatic illumination when movement is detected, while the photocell, adjustable timer, sensitivity and lux controls allow operation to be configured around the requirements of the room.

Selectable 2700K, 3000K and 4000K colour temperatures provide the flexibility to choose between warmer residential illumination and cleaner neutral white task lighting without changing the fitting.

Performance is equally practical, with 510–560 lumens from only 6W, efficacy of up to 93lm/W and a versatile 50° beam angle.

The combination of IP65 ingress protection and IK07 impact resistance provides additional durability, while the compact 68mm cut-out and 88 × 43mm dimensions make the Esa Spot easy to incorporate into appropriate recessed lighting layouts.

Triac dimming provides additional lighting control, while Aurora's specified L80B10 50,000-hour lifespan and 5-year warranty support long-term use.

For bathrooms, corridors, cupboards and other intermittently occupied spaces where automatic lighting, colour-temperature flexibility and efficient LED performance are priorities, the Aurora Esa Spot 100620 provides a highly versatile all-in-one downlight solution.