Fox ESS A-Lite 7.3kW Smart EV Charger Tethered 5m Type 2 with RFID and OCPP | L07PMC

SKU: L07PMC

Brand: Fox ESS

The commercial version of Fox ESS's single phase wallbox, with a 5m tethered Type 2 cable, an RFID card reader, OCPP back office support and a wired Ethernet port. It suits shared driveways, workplaces and small sites, and it works just as well at home with Fox ESS solar.

£359.99 (inc. VAT)£299.99 (exc. VAT)

Secure shopping guaranteed

Feefo logo

Free Delivery on orders over £100

The Fox ESS A-Lite L07PMC is a 7.3kW, 32A single phase EV charger with a 5m tethered Type 2 cable. This is the commercial version of the L Series platform: it adds an RFID card reader, OCPP 1.6 JSON or 2.0.1 back office support and a wired RJ45 Ethernet port. The IP55 enclosure is IK08 impact rated and can be wall or post mounted.

RFID means only authorised cards or fobs can start a session, so it suits shared bays, workplaces and pay per use sites. OCPP lets you manage, monitor and bill it through any compatible charge point management system, and Ethernet gives a steadier connection than Wi-Fi alone. Paired with a Fox ESS hybrid inverter, it can charge from surplus solar, while dynamic load balancing lowers the charging power to protect the incoming supply. Browse more electric car chargers or the wider Fox ESS range.

Key features

  • Up to 7.3kW at 32A on a single phase supply
  • Fixed 5m Type 2 cable
  • RFID reader (Mifare ISO/IEC 14443 A) for authorised access
  • Start by Plug & Charge, RFID card or the Fox ESS app
  • OCPP 1.6 JSON or 2.0.1 with an open Modbus interface
  • Ethernet, Wi-Fi and Bluetooth connectivity
  • Solar surplus charging, dynamic load balancing and scheduled charging
  • Integrated 6mA DC leakage detection and PEN fault protection
  • V2G hardware ready (ISO 15118)
  • Rated power: 7.3kW
  • Current: 32A
  • Supply: 230V ±20% single phase (L, N, PE), 50/60Hz
  • Connector: Type 2, 5m tethered cable
  • Residual current detection: 6mA DC RCD-DD to IEC 62955; external RCCB required
  • Protection: over and under voltage, overcurrent, leakage, earth fault, surge, over temperature, tamper and PEN fault
  • Ingress protection: IP55
  • Impact rating: IK08
  • Dimensions: 196 x 197 x 105mm
  • Mounting: wall or post, bottom or rear cable entry
  • Operating temperature: -25 to 50°C
  • Standards: EN/IEC 61851-1:2019, EN/IEC 61851-21-2:2021; CE, UKCA
  • Manufacturer part number: L07PMC

Suitable for

Workplaces, small businesses, holiday lets, flats with shared parking and homes that need controlled access or back office management, particularly where Fox ESS solar or battery storage is fitted. Installation must be carried out by a qualified electrician to BS 7671, with a Type A or Type B RCCB upstream. See our EV consumer units for the circuit protection.

PAYMENT METHODS

© Copyright 2026, Alert Electrical Limited, All Rights Reserved.

Ecommerce by Imaginaire