FuseBox 6A 30mA Type A B Curve 6kA RCBO | RTA060630B

Single Module 6A Type A RCBO for FuseBox Consumer Units

The FuseBox RTA060630B is a 6A 30mA Type A RCBO designed to provide combined overcurrent and residual current protection within FuseBox consumer units and compatible modular enclosures.

Combining the functions of an MCB and RCD in a single device, this RCBO protects against overloads, short circuits and earth leakage faults. Its Type A residual current characteristics allow detection of both AC and pulsating DC residual currents, making it suitable for modern electrical installations containing electronic equipment.

With a B Curve characteristic, 6kA short-circuit capacity and 30mA residual operating current, the RTA060630B provides reliable individual circuit protection while occupying just a single module within the consumer unit.

Features

• 6A Rated Current
• 30mA Residual Operating Current
• Type A Residual Current Protection
• B Curve Tripping Characteristic
• 6kA Short-Circuit Breaking Capacity
• Combined Overload & Earth Leakage Protection
• Protects Against Short Circuits
• Detects AC & Pulsating DC Residual Currents
• 1 Pole + Neutral Configuration
• Single Module Design
• 230V AC Rated Voltage
• 50/60Hz Frequency
• IP20 Rated
• 35mm DIN Rail Mounting
• Flying Neutral Cable
• Designed for FuseBox Consumer Units
• Complies with IEC/EN 61009-1

Combined RCBO Circuit Protection

An RCBO combines residual current protection and overcurrent protection within a single protective device.

The RTA060630B therefore provides protection against:

• Overloads
• Short Circuits
• Earth Leakage / Residual Current Faults

If an appropriate fault condition occurs, the RCBO disconnects the affected circuit, providing individual protection without relying on one shared RCD to protect several outgoing circuits.

Type A Residual Current Protection

The RTA060630B is a Type A RCBO, designed to respond to AC and pulsating DC residual currents.

Type A protection is particularly relevant to modern installations because many contemporary electrical and electronic appliances can produce residual currents with a pulsating DC component.

6A B Curve Protection

Rated at 6A, this model uses a B Curve tripping characteristic.

Its rating makes it suitable for appropriately designed lower-current circuits, including applications such as lighting, subject to circuit design, cable selection and installation requirements.

6kA Short-Circuit Capacity

The RTA060630B has a rated 6kA short-circuit breaking capacity, providing protection against short-circuit fault currents within installations for which this rating is appropriate.

FuseBox identifies the RTA series as its 6kA Type A RCBO range manufactured to BS/IEC EN 61009-1.

Single Module DIN Rail Design

The RCBO uses a compact single-module format, helping maximise available space within the consumer unit.

It mounts onto a standard 35mm DIN rail and is specifically designed for use with FuseBox consumer units and modular enclosures.

• Brand: FuseBox
• Product Code: RTA060630B
• Product Type: RCBO
• Rated Current: 6A
• Residual Operating Current: 30mA
• RCD Type: Type A
• Tripping Characteristic: B Curve
• Rated Short-Circuit Capacity: 6kA
• Number of Poles: 1P + N
• Rated Voltage: 230V AC
• Frequency: 50/60Hz
• IP Rating: IP20
• Module Width: 1 Module
• Mounting: 35mm DIN Rail
• Maximum Incoming Terminal Capacity: 16mm²
• Maximum Outgoing Terminal Capacity: 10mm²
• Dimensions (H x W x D): 114 x 17.8 x 69.6mm
• Standard: IEC/EN 61009-1

Suitable Applications

• FuseBox Consumer Units
• Domestic Electrical Installations
• Lighting Circuits
• Residential Properties
• New-Build Installations
• Consumer Unit Upgrades
• Circuit Extensions
• Individual Circuit Protection
• Appropriate Light Commercial Applications

Electrical circuit protection must always be selected according to the requirements of the circuit and applicable wiring regulations.

Why Choose the FuseBox RTA060630B?

The FuseBox RTA060630B combines three important forms of circuit protection overload, short-circuit and residual current protection within one compact single-module device.

Its 6A rating, B Curve characteristic, 30mA Type A residual protection and 6kA breaking capacity make it a practical choice for appropriately designed circuits within FuseBox consumer units.

The single-module DIN rail format also allows individual RCBO protection to be incorporated without unnecessarily consuming valuable space inside the consumer unit.