FuseBox 80A Fused Switch 1P+N with Cable Shroud & ME80 Fuse | FMS080

Compact 80A Fused Switch for Domestic Electrical Installations

The FuseBox FMS080 is an 80A 1P+N fused switch supplied complete with a cable shroud and Lawson ME80 80A fuse, providing switching and fused overcurrent protection in a compact unit.

Designed primarily for domestic electrical applications, the FMS080 operates at 230V / 50Hz and provides a maximum load rating of 80A AC21. Its compact construction, 25mm² maximum cable capacity and included fuse make it a convenient solution for appropriately designed supply and distribution arrangements.

Features

• 80A Fused Switch
• 1 Pole + Neutral Configuration
• Supplied with Lawson ME80 80A Fuse
• Cable Shroud Included
• 22 x 58mm Fuse Format
• 80A Maximum AC21 Rating
• 230V / 50Hz
• 500V Rated Insulation Voltage
• 25mm² Maximum Cable Capacity
• 2.5Nm Terminal Torque
• IP20 Rated
• Urea Construction
• Compact 80 x 128 x 63mm Design
• Suitable for Domestic Applications
• Manufactured to BS EN 60947-3
• Cable Tidy Supplied

FuseBox's technical data identifies the FMS080 specifically as an 80A fused switch, 1P+N, supplied with shroud and ME80 fuse.

Supplied with Lawson ME80 80A Fuse

A key advantage of the FMS080 is that the required Lawson ME80 80A fuse is supplied with the unit.

The manufacturer specifies an 80A ME-type fuse in the 22 x 58mm format, giving installers a complete fused-switch solution without needing to source the specified fuse separately.

The fuse provides overcurrent protection for the connected circuit, while the switching mechanism provides convenient isolation.

80A 1P+N Switching

The FuseBox FMS080 has a 1 pole + neutral configuration and a maximum current rating of 80A AC21.

This makes it suitable for appropriately designed single-phase domestic electrical installations requiring combined switching and fuse protection. The device has a rated operating voltage of 230V at 50Hz and a rated insulation voltage of 500V.

Cable Shroud Included

The FMS080 is supplied complete with a cable shroud, helping provide a neat and protected installation around the cable termination area.

A cable tidy is also supplied, further assisting installers in achieving an organised finished installation.

25mm² Maximum Cable Capacity

The FMS080 accommodates conductors up to 25mm², making it suitable for the substantial cable sizes typically associated with higher-current domestic distribution applications.

FuseBox specifies a 2.5Nm terminal tightening torque for the unit.

Compact IP20 Construction

With dimensions of just 80mm high x 128mm wide x 63mm deep, the FMS080 provides its switching and fuse protection functions within a relatively compact footprint.

The unit is manufactured from urea and carries an IP20 rating.

Safety-Focused Switch Design

The FMS080's lid is designed so that it can only be removed when the switch is in the OFF position, providing a useful safety feature during access and maintenance.

FuseBox also specifies that the fuse must not be installed or removed while under load.

• Brand: FuseBox
• Product Code: FMS080
• Product Type: Fused Switch
• Rated Current: 80A Maximum
• Utilisation Category: AC21
• Pole Configuration: 1P + N
• Rated Voltage: 230V
• Frequency: 50Hz
• Rated Insulation Voltage (Ui): 500V
• Fuse Supplied: Lawson ME80
• Fuse Rating: 80A
• Fuse Type: ME Type
• Fuse Size: 22 x 58mm
• Cable Shroud: Included
• Maximum Cable Capacity: 25mm²
• Terminal Torque: 2.5Nm
• IP Rating: IP20
• Material: Urea
• Application: Domestic
• Dimensions (H x W x D): 80 x 128 x 63mm
• Weight: 0.75kg
• Barcode / GTIN: 5060523523009
• Switch Standard: BS EN 60947-3
• Fuse Standards: BS HD 60269-3:2010+A1:2013 / BS 88-3:2010

Suitable Applications

• Domestic Electrical Installations
• Fused Supply Protection
• Electrical Distribution
• Appropriate Sub-Main Circuits
• Supply Isolation
• Residential Properties
• Consumer Unit Installations
• Electrical Installation Upgrades
• New-Build Properties
• Installations Requiring 80A Fuse Protection

Why Choose the FuseBox FMS080?

The FuseBox FMS080 provides a straightforward combination of 80A switching and fused protection in a compact, installer-friendly format.

Supplied complete with the Lawson ME80 80A fuse, cable shroud and cable tidy, the unit provides the essential components required for a professional installation. Its 1P+N configuration, 25mm² terminal capacity and compact 80 x 128 x 63mm dimensions make it particularly useful where space is at a premium.