Saxby Luik Standard CCT Wattage Selectable Gear Tray 9W/14W/18W | 61652

CCT & Wattage Selectable LED Gear Tray for Saxby Luik Bulkhead Casings

The Saxby Luik Standard Gear Tray | 61652 is the standard non-dimmable LED gear tray designed for use with the Saxby Luik range of bulkhead casings. Offering both wattage and colour temperature selection, it allows installers to configure the finished Luik bulkhead according to the lighting requirements of each application.

Three selectable wattages of 9W, 14W and 18W are available alongside three selectable colour temperatures of 3000K, 4000K and 6000K, all chosen using switches on the driver before installation.

The 61652 is the standard Luik gear tray, without emergency or microwave sensor functionality. It can be combined with Luik plain, eyelid and grille casings in a choice of black, grey and white finishes, allowing one versatile LED platform to be used throughout commercial, communal and residential projects.

Features

• Saxby Luik Standard LED Gear Tray
• Product Code 61652
• Designed for Saxby Luik Bulkhead Casings
• Standard Non-Emergency Version
• Non-Microwave Version
• Non-Dimmable
• Tri-Wattage Selectable
• 9W / 14W / 18W Power Selection
• 3CCT Selectable
• 3000K Warm White
• 4000K Cool White
• 6000K Daylight
• Integrated LED Module
• SMD LED Technology
• Up to 2500 Lumens
• Up to 139lm/W Efficiency
• 220–240V AC Supply
• 50Hz
• Class I
• IP20 Gear Tray
• Compatible with Luik Plain Casings
• Compatible with Luik Eyelid Casings
• Compatible with Luik Grille Casings
• Suitable for Wall or Ceiling Luik Installations
• Professional-Replaceable Control Gear
• Energy Efficiency Class D Light Source

Saxby's current Luik instructions confirm the 9W/14W/18W selectable output and 3000K/4000K/6000K CCT settings.

One Gear Tray – Three Selectable Wattages

A major benefit of the Saxby Luik 61652 is its tri-wattage selectable driver.

Rather than specifying separate gear trays for different lighting-output requirements, the installer can select between:

• 9W – Lower-output, energy-conscious setting
• 14W – Balanced intermediate setting
• 18W – Maximum-output setting

The required wattage is selected using the switch located on the driver and should be chosen before installation. Saxby's instructions specify that the power must be switched off before changing the wattage setting.

This flexibility makes the Luik system particularly useful on larger projects where different corridors, stairwells, entrances and circulation spaces may require different illumination levels.

3CCT Selectable Colour Temperature

The 61652 also incorporates three selectable colour temperatures, allowing the appearance of the light to be configured for the installation.

Choose between:

• 3000K – Warm White
• 4000K – Cool White
• 6000K – Daylight

The required colour temperature is selected using the dedicated CCT switch on the driver before installation.

This gives contractors greater flexibility from a single product and can reduce the number of different LED fittings that need to be stocked for a project.

3000K Warm White

The 3000K setting provides a warmer and more welcoming appearance.

It is particularly useful for residential developments, apartment entrances, hospitality environments and other locations where a softer light is preferred.

4000K Cool White

The 4000K setting provides a clean, neutral-white appearance and is a popular choice for general commercial and communal lighting.

It is well suited to corridors, stairwells, utility spaces, apartment blocks and general circulation areas.

6000K Daylight

For applications requiring a crisp, cooler appearance, the gear tray can be switched to 6000K daylight.

This setting can be particularly useful for functional spaces where a bright, high-contrast lighting appearance is preferred.

High-Efficiency LED Performance

The Luik gear tray uses modern LED technology to provide efficient illumination within a compatible Luik casing.

Saxby's current Luik microwave gear tray from the same platform specifies the selectable 9W/14W/18W system at up to 2500 lumens and 139lm/W, while the shared Luik instructions confirm that the 61652 uses the same selectable 9W/14W/18W LED and 3000K/4000K/6000K configuration.

This combination of selectable power and colour temperature makes the Luik platform adaptable to a wide range of lighting requirements.

Standard Non-Dimmable Configuration

The 61652 is the standard Luik gear tray and is designed for straightforward switched lighting applications.

It does not incorporate emergency lighting or microwave occupancy sensing.

Saxby identifies the four Luik gear-tray configurations as:

• 61652 – Standard Non-Dimmable
• 61653 – Emergency
• 72180 – Microwave
• 72181 – Microwave & Emergency

This allows the appropriate gear tray to be selected for each position while retaining matching Luik casings throughout the project.

Designed for Saxby Luik Casings

The 61652 is specifically designed to fit the modular Saxby Luik bulkhead casing range.

Compatible casing styles include plain, eyelid and grille designs, with multiple finishes available.

For example, Saxby confirms the 61652 as a compatible gear tray for the 61648 Luik Textured Black Eyelid Casing.

Compatible Luik Black Casings

The 61652 can be combined with:

• 61646 – Luik Plain Casing, Textured Black
• 61648 – Luik Eyelid Casing, Textured Black
• 61650 – Luik Grille Casing, Textured Black

Compatible Luik Grey Casings

The 61652 can also be combined with:

• 61647 – Luik Plain Casing, Grey
• 61649 – Luik Eyelid Casing, Grey
• 61651 – Luik Grille Casing, Grey

Compatible Luik White Casings

For installations requiring a white finish, compatible casings include:

• 69231 – Luik Plain Casing, White
• 69232 – Luik Eyelid Casing, White
• 69233 – Luik Grille Casing, White

These casing and gear-tray combinations are listed in Saxby's current Luik installation instructions.

Simple Modular Installation

The Luik system is designed so that the casing is installed first and the selected gear tray is then located onto the retaining clips and secured into position.

Once the electrical connections are complete, the polycarbonate diffuser and outer bezel are refitted to complete the luminaire.

This modular approach makes it straightforward to select the required exterior design independently from the electrical functionality.

Wall or Ceiling Applications

When fitted into a suitable Luik casing, the 61652 can form part of a wall or ceiling-mounted bulkhead installation.

This makes the finished Luik fitting suitable for a broad variety of commercial and residential applications, from communal corridors and staircases to exterior walls and covered access areas.

The final IP and impact protection of the assembled luminaire is dependent on the appropriate Luik casing and correct installation.

• Brand: Saxby
• Range: Luik
• Product Code: 61652
• Product Type: Standard LED Gear Tray
• Function: Standard / Non-Emergency
• Microwave Sensor: No
• Emergency Function: No
• Dimmable: No
• Wattage Selectable: Yes
• Wattage Options: 9W / 14W / 18W
• CCT Selectable: Yes
• Colour Temperature Options: 3000K / 4000K / 6000K
• LED Type: LED Module (SMD)
• Maximum Light Output: Up to 2500 Lumens
• Maximum Efficiency: Up to 139lm/W
• Supply Voltage: 220–240V AC
• Frequency: 50Hz
• Operating Temperature: 0°C to 50°C
• Maximum Operating Humidity: 90%
• Gear Tray IP Rating: IP20
• Electrical Class: Class I
• Energy Efficiency Class: D
• Control Gear: Replaceable by a Professional
• Installation: Compatible Luik Casing Required
• Compatible Casing Styles: Plain, Eyelid & Grille
• Suitable Mounting with Casing: Wall or Ceiling

The Luik instructions confirm the gear tray's 220–240V 50Hz supply, 0°C to 50°C operating range, 90% maximum operating humidity, IP20 rating and Class I construction.

Important – Luik Casing Required

The Saxby 61652 is a gear tray and is not supplied as a complete standalone bulkhead fitting.

A compatible Saxby Luik casing must be purchased separately.

This modular system allows you to select the casing according to the required appearance and then choose the gear tray according to the required functionality.

For a standard fitting, select 61652. Where additional functionality is required, Saxby offers emergency, microwave and combined microwave/emergency alternatives.

Suitable Applications

• Saxby Luik Bulkhead Lighting
• Commercial Lighting
• Residential Developments
• Apartment Blocks
• Communal Areas
• Corridors
• Stairwells
• Entrance Areas
• Exit Routes
• Walkways
• Utility Areas
• Public Buildings
• Schools & Colleges
• Commercial Premises
• Industrial Buildings
• Warehouses
• Exterior Bulkheads with Suitable Luik Casing
• Wall-Mounted Bulkhead Lighting
• Ceiling-Mounted Bulkhead Lighting
• Replacement Luik Gear Tray Applications

Why Choose the Saxby Luik 61652?

The Saxby Luik 61652 provides a flexible standard lighting solution for the modular Luik bulkhead range.

Its 9W, 14W and 18W selectable power settings allow the light output and energy consumption to be adapted to the application, while the 3000K, 4000K and 6000K CCT selector provides a choice between warm white, cool white and daylight illumination.

The modular design also means installers can combine the same gear tray with a variety of plain, eyelid and grille Luik casings, helping create a consistent appearance across larger projects while selecting the casing finish appropriate for each location.

For installations that don't require emergency or microwave functionality, the 61652 standard gear tray provides the straightforward, versatile option within the Saxby Luik range.