Soudal Silicone Spray 400ml High Temperature Lubricant | 119704

Transparent Silicone Lubricant & Protective Spray for Metal, Plastic and Rubber

The Soudal Silicone Spray 400ml is a professional transparent silicone-based lubricant and anti-adhesive spray designed to reduce friction, minimise wear and protect mechanical components.

Formulated using high-grade silicone oil, it is particularly suitable for light lubrication of metals, plastics and rubber components. It also creates a water-repellent protective layer, helping protect components and electrical wiring against moisture.

With an impressive operating temperature resistance of -40°C to +200°C, 360° aerosol application and electrically insulating properties, Soudal Silicone Spray is a versatile maintenance product for professional, automotive, construction and general-purpose applications.

Features

• Professional Silicone Lubricant Spray
• 400ml Aerosol
• High-Grade Silicone Oil Formula
• Transparent Finish
• Lubricates & Protects
• Reduces Friction
• Helps Reduce Mechanical Wear
• Anti-Adhesive Properties
• Rust & Corrosion Resistant
• Water-Repellent
• Helps Protect Against Moisture
• Suitable for Metal, Plastic & Rubber
• Suitable for Indoor & Outdoor Use
• Very High Temperature Resistance
• Temperature Resistant from -40°C to +200°C
• Electrically Insulating
• 14kV/mm Dielectric Strength at 20°C
• Helps Prevent Dirt & Grease Deposits
• Gives Plastics & Rubber a Glossy Finish
• 360° Aerosol Application
• Suitable for Sliding Doors & Rubber Seals
• Ideal for Gutter & Pipe Seals

These properties are confirmed by Soudal's current UK technical data sheet.

Reduces Friction & Mechanical Wear

Soudal Silicone Spray creates a lubricating film that helps reduce friction and wear on moving mechanical components.

It is particularly suited to light-duty lubrication where metal, plastic or rubber components move against one another, helping maintain smooth movement while reducing unnecessary wear.

This makes it useful for maintenance work involving sliding mechanisms, rails, seals and other moving components.

Ideal for Plastic & Rubber Components

One of the main advantages of silicone lubricant is its suitability for plastic and rubber components.

Soudal specifically recommends the spray for lubricating and protecting plastics and rubbers, with typical applications including sliding doors, rubber seals, gutter seals and pipe seals.

It can also leave plastic and rubber components with a glossy appearance after treatment.

Water-Repellent Moisture Protection

In addition to lubrication, Soudal Silicone Spray forms a water-repellent layer.

This makes it useful where components require additional protection against moisture. Soudal identifies applications including protecting the electrical wiring of cars, engines and lawn mowers from moisture.

Its suitability for both indoor and outdoor use further increases its versatility for maintenance applications.

Electrically Insulating

Soudal Silicone Spray has electrically insulating properties, with the current technical data sheet specifying a dielectric strength of 14kV/mm at 20°C.

This characteristic, combined with its water-repellent properties, makes it useful for appropriate electrical and automotive maintenance applications where moisture protection is required.

High Temperature Resistance up to 200°C

The lubricant provides excellent temperature resistance across a range of approximately -40°C to +200°C.

This wide operating range makes Soudal Silicone Spray suitable for applications exposed to considerably greater temperature variations than many conventional light lubricants.

Helps Prevent Dirt & Grease Deposits

The silicone coating also helps prevent dirt and grease deposits, with Soudal identifying rails as one application where this characteristic is particularly useful.

Combined with its friction-reducing properties, this makes the spray a practical maintenance product for sliding and moving mechanisms.

360° Aerosol Application

The aerosol can be used at any angle through 360°, making application easier when components are located in awkward or difficult-to-reach positions.

This is particularly useful for maintenance, automotive and installation work where the aerosol cannot always be held upright.

How to Apply

Surfaces should be clean, degreased and dry before application.

Shake the aerosol thoroughly before use and spray evenly from a distance of approximately 20cm, applying a thin layer to the required surface.

Soudal states that treated surfaces cannot subsequently be painted, so this should be considered before application. The product must also not be used on brake drums or brake discs.

• Brand: Soudal
• Product Name: Silicone Spray
• Product Type: Silicone Lubricant & Protective Spray
• Pack Size: 400ml
• Packaging: Aerosol
• Base: Mixture Based on Silicone Oil
• Colour: Transparent
• Consistency: Liquid
• Density: Approx. 0.74g/ml
• Viscosity: 29mPa.s
• Acidity Level: Neutral
• Solubility in Water: Not Soluble
• VOC Content: 90%
• Application Temperature: +5°C to +35°C
• Temperature Resistance: -40°C to +200°C
• Dielectric Strength: 14kV/mm at 20°C
• Water-Repellent: Yes
• Rust & Corrosion Resistant: Yes
• Electrical Insulation: Yes
• Indoor & Outdoor Use: Yes
• 360° Application: Yes
• Suitable Materials: Metals, Plastics & Rubber
• Paintable After Application: No
• Shelf Life: 3 Years Unopened
• Recommended Storage: Dry, Cool Conditions Between +5°C and +25°C

Suitable Applications

• Sliding Doors
• Rubber Seals
• Gutter Seals
• Pipe Seals
• Plastic Components
• Rubber Components
• Light Metal Lubrication
• Rails & Sliding Mechanisms
• Automotive Maintenance
• Car Electrical Wiring
• Engines
• Lawn Mower Wiring
• Mechanical Components
• Property Maintenance
• Construction & Installation Work
• Indoor & Outdoor Maintenance

Why Choose Soudal Silicone Spray?

The Soudal Silicone Spray 400ml provides more than straightforward lubrication. Its high-grade silicone formulation reduces friction and wear, repels water, resists corrosion and helps protect components against moisture.

Its compatibility with metal, plastic and rubber, combined with -40°C to +200°C temperature resistance, makes it a particularly versatile product for professional maintenance.

The 360° aerosol operation also makes application straightforward in confined spaces, while its electrically insulating properties expand its usefulness into appropriate automotive and electrical maintenance applications.