Ansell Prism Pro XM 5W/7W CCT Selectable IP65 Fire Rated LED Downlight | APRIPXM/1

The Ansell Prism Pro XM LED Downlight (APRIPXM/1) is a high-performance, dimmable, fire-rated recessed ceiling light designed for residential and hospitality lighting installations.

Featuring selectable 5W or 7W power, four colour temperature settings, IP65 protection and a replaceable LED light engine and driver, the Prism Pro XM provides flexibility, energy-efficient illumination and long-term serviceability in one modern downlight.

Its innovative modular design allows individual components to be replaced without replacing the entire fitting, helping reduce waste and extend the useful life of the installation.

The downlight is supplied with a white bezel as standard and features a compact, low-profile design suitable for installation into shallow ceiling voids.

Features

• Selectable 5W or 7W output – Choose between two power settings to suit different room sizes and lighting requirements.
• Four selectable colour temperatures – Switch between 2700K warm white, 3000K warm white, 4000K cool white and 6000K daylight.
• IP65 rated – Provides protection against dust and water jets, suitable for appropriate indoor bathroom and moisture-prone applications.
• Fire rated for 30, 60 and 90-minute ceiling constructions – Tested for use in suitable fire-rated ceiling assemblies.
• Dimmable LED technology – Allows lighting levels to be adjusted with compatible LED dimming controls.
• High light output – Delivers approximately 640–820 lumens at 4000K, depending on the selected wattage.
• 60° beam angle – Provides broad, practical light distribution for general room illumination.
• Replaceable light engine and driver – Modular design enables individual component replacement to support easier maintenance and reduced waste.
• Two-part detachable connector – Allows initial wiring and testing before the downlight is connected for final installation.
• Fast-fit plug with lever terminals – Helps simplify electrical connections and installation.
• Low-profile construction – Approximately 63mm high, ideal for suitable shallow ceiling voids.
• White bezel supplied as standard – Alternative decorative bezels are available separately.
• Genuine Ansell Lighting product – Manufacturer part number APRIPXM/1.

Four Colour Temperatures in One Downlight

The Ansell Prism Pro XM features selectable colour temperature technology, allowing the installer to choose the most suitable lighting appearance for each room.

2700K – Extra Warm White

Creates a warm, comfortable atmosphere, ideal for bedrooms, lounges and relaxing living spaces.

3000K – Warm White

Provides a welcoming, soft white light suitable for kitchens, dining rooms, hallways and general residential lighting.

4000K – Cool White

Delivers a cleaner, more neutral appearance, ideal for utility rooms, kitchens, work areas and task-oriented spaces.

6000K – Daylight

Produces a crisp, bright white appearance suitable for areas where a daylight-style lighting effect is preferred.

With four colour temperature settings in one fitting, the Prism Pro XM provides greater installation flexibility and reduces the need to stock multiple fixed-colour downlight versions.

Selectable 5W or 7W LED Output

The Prism Pro XM features dual-wattage technology, allowing the installer to select either 5W or 7W operation.

The lower wattage setting can be used where reduced light output is preferred, while the higher wattage setting provides additional brightness for rooms requiring stronger illumination.

At 4000K, the downlight delivers approximately 640–820 lumens depending on the selected power setting.

This flexibility makes the fitting suitable for a wide range of residential and hospitality lighting applications.

IP65 Protection for Bathroom and Kitchen Lighting

With an IP65 rating, the Ansell Prism Pro XM provides protection against dust ingress and water jets, making it suitable for appropriate indoor installations where moisture resistance is required.

It is a practical choice for bathrooms, kitchens, utility rooms and other suitable interior environments.

For bathroom installations, the fitting's suitability must be assessed against the applicable electrical installation requirements and bathroom zones.

Fire Rated for 30, 60 and 90-Minute Ceiling Types

The Ansell Prism Pro XM is designed for installations where maintaining the fire performance of suitable ceiling constructions is important.

The downlight has been tested for 30, 60 and 90-minute fire-rated ceiling types, subject to the manufacturer's installation instructions and the ceiling construction being used.

Its fire-rated construction makes it a practical option for residential developments, property refurbishments and professional lighting installations.

Modular Design with Replaceable Light Engine and Driver

A key feature of the Ansell Prism Pro XM is its modular construction.

Unlike many sealed LED downlights, the Prism Pro XM features a replaceable light engine and driver, allowing individual components to be changed when necessary.

This helps reduce unnecessary waste, supports long-term maintenance and can extend the useful life of the installed downlight.

The modular design is particularly beneficial for electricians, property maintenance teams and installations where ongoing serviceability is important.

Fast and Convenient Installation

The Prism Pro XM incorporates a two-part detachable connector, allowing the electrical connection and initial testing to be completed before the downlight is fitted into the ceiling.

The fast-fit plug and lever terminals help simplify installation, while the compact 63mm body height makes the fitting suitable for appropriately sized shallow ceiling voids.

The downlight requires a nominal 72mm ceiling cut-out and has an overall diameter of 88mm.

Installation must be carried out in accordance with the manufacturer's instructions and applicable electrical regulations.

Alternative Bezels and Converter Kits

The Ansell Prism Pro XM is supplied with a white bezel as standard.

Alternative decorative bezels are available separately in Matt Black, Satin Chrome, Chrome and Antique Brass.

For retrofit installations where the existing ceiling opening is larger than the standard 72mm cut-out, compatible Prism Pro XM converter kits are also available.

These accessories allow installers to achieve a neat, professional finish when upgrading existing recessed lighting.

Frequently Asked Questions

Is the Ansell APRIPXM/1 fire rated?

Yes. The Ansell Prism Pro XM APRIPXM/1 has been tested for use in suitable 30, 60 and 90-minute fire-rated ceiling constructions. Installation must follow the manufacturer's requirements.

Is the Ansell Prism Pro XM suitable for bathrooms?

The downlight has an IP65 rating and can be used in appropriate bathroom installations, subject to the applicable electrical regulations and installation requirements.

Can I change the colour temperature?

Yes. The Prism Pro XM offers four selectable colour temperatures: 2700K, 3000K, 4000K and 6000K. The setting is selected using the fitting's controls in accordance with the manufacturer's instructions.

Can I change the wattage?

Yes. The downlight offers selectable 5W and 7W operation, allowing the installer to choose the appropriate power setting.

Is the Ansell APRIPXM/1 dimmable?

Yes. The downlight is dimmable when used with a compatible LED dimmer. Always check dimmer compatibility before installation.

What size hole is required for the Ansell APRIPXM/1?

The downlight requires a nominal 72mm ceiling cut-out. Its overall diameter is 88mm and its height is approximately 63mm.

Can the LED light engine be replaced?

Yes. The Prism Pro XM features a modular design with a replaceable LED light engine and driver, allowing individual components to be replaced when required.

Does the downlight come with a bezel?

Yes. The APRIPXM/1 is supplied with a white bezel as standard. Alternative finishes are available separately.

Can I install the Prism Pro XM into an existing larger downlight hole?

Compatible Prism Pro XM converter kits are available for larger existing ceiling openings, up to 150mm subject to the manufacturer's requirements.

What is the difference between the Prism Pro XM and Prism Pro XM Anti-Glare?

The standard APRIPXM/1 has a 60° beam angle and is designed for general illumination. The separate Prism Pro XM Anti-Glare model features a recessed optical design intended to reduce visible glare.