Ansell Prism Pro XM Converter Kit White Downlight Ceiling Cut-Out Adaptor Up to 150mm | APRIPXM/CP/WH

The Ansell Prism Pro XM Converter Kit – White (APRIPXM/CP/WH) is a practical ceiling conversion accessory designed for use with compatible Ansell Prism Pro XM recessed LED downlights.

Ideal for lighting upgrades and refurbishment projects, this converter kit allows compatible Prism Pro XM downlights to be fitted into existing larger ceiling openings, accommodating cut-outs of up to 150mm.

When replacing older recessed downlights, the existing ceiling hole may be larger than the cut-out required by a modern LED fitting. The Ansell Prism Pro XM Converter Kit provides a convenient solution, helping to cover the existing opening and achieve a neat, professional finish.

Finished in white, the converter kit blends discreetly with white ceilings and contemporary interiors, making it suitable for residential and hospitality lighting installations.

Designed specifically for the modular Ansell Prism Pro XM downlight family, the converter kit is listed as an accessory for the standard Prism Pro XM, Prism Pro XM Anti-Glare and Prism Pro XM Gimbal ranges.

Whether upgrading existing downlights in a kitchen, hallway, bedroom or commercial refurbishment project, the APRIPXM/CP/WH provides a practical way to adapt larger ceiling openings for compatible modern LED downlights.

Please note: This product is a converter kit only. The LED downlight, light engine and driver are not included.

Key Features

• Genuine Ansell Lighting accessory – designed for the Prism Pro XM range
• Manufacturer part number APRIPXM/CP/WH
• White finish – discreet appearance against light-coloured ceilings
• For ceiling cut-outs up to 150mm – suitable for larger existing openings
• Ideal for downlight replacements – helps avoid unnecessary ceiling alterations
• Designed for compatible Prism Pro XM downlights
• Suitable for standard, Anti-Glare and Gimbal Prism Pro XM variants
• Retrofit-friendly solution – ideal for lighting upgrades
• Neat ceiling finish – helps cover oversized downlight openings
• Suitable for residential and hospitality applications
• Accessory only – no LED light source or driver included

Ideal for Larger Existing Ceiling Cut-Outs

The Ansell Prism Pro XM Converter Kit is particularly useful when replacing an older recessed ceiling light with a modern Prism Pro XM LED downlight.

Older fittings may require larger installation holes, which can create difficulties when upgrading to a smaller downlight.

The converter kit is designed to accommodate existing cut-outs of up to 150mm, providing a practical solution without necessarily needing to repair or replace the surrounding ceiling.

The condition and dimensions of the existing ceiling opening should always be checked before installation.

Designed for Ansell Prism Pro XM Downlights

The APRIPXM/CP/WH forms part of the Ansell Prism Pro XM accessory range.

It is listed for use with compatible products in the following families:

• Prism Pro XM Standard Fire Rated Downlights

• Prism Pro XM Anti-Glare Fire Rated Downlights

• Prism Pro XM Gimbal Fire Rated Downlights

The converter kit provides the ceiling adaptation component; the selected downlight supplies the lighting and electrical functionality.

Contemporary White Finish

The white finish offers a clean, understated appearance that complements white ceilings and modern interiors.

It is particularly suitable for refurbishment projects where a consistent ceiling finish is required throughout multiple rooms.

Alternative converter kit finishes are available separately within the Prism Pro XM range.

Suitable Applications

• Replacement of older recessed downlights
• Existing oversized ceiling cut-outs
• Residential lighting refurbishments
• Kitchen lighting upgrades
• Hallways and corridors
• Bedrooms and living areas
• Hotel and hospitality lighting
• Apartment refurbishment projects
• Residential new-build alterations
• Compatible Prism Pro XM downlight installations

Frequently Asked Questions

What is the Ansell APRIPXM/CP/WH?

The APRIPXM/CP/WH is a white ceiling converter kit designed for compatible Ansell Prism Pro XM recessed LED downlights.

What does a downlight converter kit do?

A downlight converter kit allows a compatible recessed downlight to be installed into an existing ceiling opening that is larger than the downlight's normal cut-out requirement.

What ceiling hole size does this converter kit support?

The Ansell Prism Pro XM converter kit is designed for existing ceiling cut-outs of up to 150mm.

Is the converter kit supplied with an LED downlight?

No. The converter kit is an accessory only. The complete LED downlight must be purchased separately.

Does the converter kit include a driver?

No. It does not include an LED driver or electrical control gear.

Is it compatible with the standard Prism Pro XM downlight?

Yes. Ansell lists the converter kit as an accessory for the standard Prism Pro XM downlight range.

Can it be used with Prism Pro XM Anti-Glare downlights?

Yes. The manufacturer lists this converter kit as a compatible accessory within the Prism Pro XM Anti-Glare range.

Is it compatible with Prism Pro XM Gimbal downlights?

Yes. The converter kit is also listed for use with the compatible Prism Pro XM Gimbal range.

Can it be used with any brand of downlight?

It is designed for the Ansell Prism Pro XM range. Compatibility with unrelated downlight models is not established.

Is the converter kit fire rated?

The converter kit is an accessory and should not be described as independently fire rated. Any fire-resistance performance must be assessed for the complete installed downlight and ceiling arrangement.

Is the converter kit IP65 rated?

The converter kit itself is not an electrical luminaire. Any IP rating belongs to the relevant complete downlight assembly and its approved installation configuration.

What colour is APRIPXM/CP/WH?

This version is white.

Are other finishes available?

Yes. Ansell also lists converter kits in matt black, satin chrome, chrome and antique brass.

Installation Information

The Ansell Prism Pro XM Converter Kit is designed for installation with compatible recessed downlights in suitable ceilings.

Before installation, confirm the existing ceiling cut-out diameter, ceiling condition and compatibility with the selected Prism Pro XM fitting.

Follow the manufacturer's installation instructions for both the converter kit and the downlight.

Where a fire-rated or IP-rated downlight is required, ensure that the complete assembly and installation arrangement meet the applicable requirements.

Electrical work associated with the downlight should be undertaken by a suitably competent person in accordance with BS 7671.

The APRIPXM/CP/WH is a converter kit only and does not provide illumination independently.