
Project EV Chargers
Buy Project EV chargers at Alert Electrical, including floor and wall mounted AC and DC electric car chargers and charging points for homes, workplaces and commercial sites.
The range runs from 7.3kW AC chargers up to 300kW DC rapid chargers, and selected models offer smart app and RFID control.
Compare the Project EV range below, or browse all EV chargers to find the right charger for your vehicle and property.

EVA-07D-SE-RFID-W
Project EV 7.3kW Dual Socket Smart EV Charger Untethered Type 2 | EVA-07D-SE-RFID-W
£1,398.78(inc. VAT)

APEX-22S-T-4G
Project EV APEX 22kW Smart 4G Connected Tethered EV Charger with Type 2 Socket | APEX-22S-T-4G
£895.22(inc. VAT)

APEX-7S-T-4G
Project EV APEX 7.3kW Smart 4G Connected Tethered EV Charger with 5m Type 2 Cable | APEX-7S-T-4G
£669.58(inc. VAT)
Project EV Chargers for Home, Workplace and Commercial Sites
The Project EV chargers at Alert Electrical cover AC charging for homes and workplaces and DC fast charging for commercial sites, with power outputs from 7.3kW up to 80kW. Whether you need a single charger for a driveway or a multi vehicle solution for a car park, the right choice depends on your electricity supply, your vehicle and how quickly you need to charge.
Project EV APEX Chargers for Home Charging
The Project EV APEX range is built around smart AC charging in 7.3kW and 22kW versions, with tethered options that have the cable attached and untethered options with a Type 2 socket for your own cable. Selected models add 4G connectivity. Most UK homes have a single phase supply, which makes a 7.3kW charger such as the Project EV APEX 7.3kW smart tethered charger the usual match, while 22kW chargers need a three phase supply.
Floor Mounted and Dual Socket Chargers
For workplaces, residential developments and shared parking, the Project EV floor mounted range offers dual socket AC chargers in 7kW and 22kW versions, with RFID access on selected models. Two sockets on one unit let you connect two vehicles at once, which can reduce the number of units a site needs. The Project EV 22kW floor mounted dual socket charger is a good starting point for busier sites.
Project EV DC Fast Chargers
DC chargers deliver power directly to the vehicle’s battery, making them better suited to sites where faster turnaround matters, such as fleet depots and commercial car parks. The Project EV DC range includes 20kW and 40kW wall mounted single CCS chargers and an 80kW dual CCS unit. The Project EV 40kW DC wall charger is a popular entry point into DC charging.
How to Choose a Project EV Charger
Start with your electricity supply, as this limits the power you can use. Then check your car’s maximum charging rate, because a faster charger won’t charge a vehicle beyond what it can accept. Finally, decide between tethered and untethered, and whether you need smart features, RFID or 4G connectivity. Not sure where to begin? Compare our wider range of electric car chargers. All EV chargers should be installed by a qualified electrician.
Frequently Asked Questions
Yes. The 7.3kW APEX models suit homes with a single phase supply, with tethered and untethered options. The 22kW chargers need a three phase supply, so check yours before buying.
A 22kW charger can deliver more power than a 7kW charger, but only if your supply is three phase and your car can accept that rate. Many electric cars can’t charge at 22kW on AC, in which case a 7kW charger gives similar results at lower cost.
AC chargers send alternating current to the car, which converts it to charge the battery. DC chargers convert the power themselves and send it straight to the battery, allowing much faster charging. AC suits homes and workplaces, while DC suits commercial sites where speed matters.






